optic mpo fiber optic patch cord
"
SC/APC SM simplex 0.9mm Fiber Optic Pigtail yellow color PVC outer cable jacket
SC/APC SM simplex 0.9mm Fiber Optic Pigtail yellow color PVC outer cable jacket Features: Low insertion loss and high return loss Good exchangeability Support 10 Gigabit data transmitting rates MM cables type FC, LC, SC, MU, ST, MTRJ, E2000, MPO optional Polishing: PC, UPC and APC Meets IEC standard Application: 1,FTTH , CATV, LAN, MAN, WAN, Test &Measuremen 2,Video transmission , Data transmission 3,Active Device Termination 4,Premise Installations 5,Telecommunication and
FC, LC, SC, MU, ST, MTRJ Optional Fiber Optic Pigtail IL<=0.2dB China manufacture
FC, LC, SC, MU, ST, MTRJ Optional Fiber Optic Pigtail IL 50 (SM/UPC) , > 60 (SM/APC), 35(MM/UPC) Exchangeability: < 0.2 dB Tensile Strength: < 0.2 dB ( 0 to15 Kgf ) Temp. Range: (- 40 to +80 degree centigrade) Geometric Specification of Fiber Optic Patch Cords Finished End-face (fiber optic patch cord that passed Geometric test is of super performance) : Types: PC Connector, APC Connector Radius of Curvature: 10 to 25 mm, 5 to 15 mm Apex Offset:
FC to LC singlemode duplex optical fiber jumper 0.2dB insertion loss corning fiber
FC to LC singlemode duplex optical fiber jumper,
FC LC SC Singlemode Or Multimode Optical Fiber Pigtail PVC Or LSZH Out Cable
FC, LC,SC, singlemode or multimode, optical fiber pigtail,PVC or LSZH out cable Parameter: ParameterUnitFC, SC, LC/ Armoured fiber patch cordST, MUMT-RJ, MPOE2000SMMMSMMMSMMMSMPCUPCAPCPCPCUPCPCPCUPCPCPCAPCInsertion loss(typical)dB0.30.20.30.20.30.20.20.30.20.20.30.3Return lossdB455060304550304550355575Operating wavelengthnm1310, 15101310, 15101310, 15101310, 1510ExchangeabilitydB0.20.20.20.2VibrationdB0.20.20.20.2Operating temperatureC-40~75
OM3 aqua duplex optical jumper FC/UPC corning fiber LSZH cable jacket
OM3 aqua duplex optical jumper,FC/UPC-LC/UPC, corning fiber,LSZH cable jacket Features:Low insertion loss, high return lossSmall, light, high dense connectionStandard exact plastic materialHigh credibility and stabilityGood in repeatability and exchangeabilityApplication: Gigabit EthernetActive device terminationTelecommunication networksVideoMultimediaPremise installationsLocal area networksFTTH and FTTX applicationsCATV Material of patch cord:Dust caps: LDPE, transparen
Sliding Tray Design MPO/MTP Fiber Optic MPO Cassette-1U for Data Center and SAN System
Sliding Tray Design MPO/MTP Fiber Optic MPO Cassette-1U for Data Center and SAN System Description: MPO panels are designed to enable a fiber net work to be installed and commissioned in the short possible time. All the components are pre-assembled and easy to be installed to the shelf. It is a perfect solution for optical fiber installations and management. Features: Easy for installation and operation 19' standard structure Sliding tray design Available for the installation
1dB 2dB 3dB 4dB 5dB Fixed SC Fiber Optic Attenuator
1dB 2dB 3dB 4dB 5dB Fixed SC Fiber Optic Attenuator 1dB 2dB 3dB 4dB 5dB SC Attenuator Male to Female Fixed Fiber Optic Attenuator Product Descriptio 1. Introduction: * High power 1W continuous operation tested over 1000 hours * Precise attenuation * Return loss UPC >50 dB APC >60 dB * Low ripple broadband design for operation at both 1310 and 1550 nm * Attenuation range for SC, FC, and LC types 1 to 13 dB in 1 dB increments, 15 dB, and 20 dB 2. Fiber Optical Attenuator
LC PC SM SX 0.9mm Fiber Optic Pigtail IL<=0.2dB white fiber cable
LC PC SM SX 0.9mm Fiber Optic Pigtail IL
Single Mode, Multi Mode SC PC MM SX 0.9mm Fiber Optic Pigtail
Single Mode, Multi Mode SC PC MM SX 0.9mm Fiber Optic Pigtail Features: 4, 6, 8, 12, 24, 48 fibers optional With heat shrinkable tube Applicable connector: FC, SC, ST, LC Cable material: PVC, OM1, OM2 or OM3 optional Single mode or multi mode Cable size: 0.9mm, 2.0mm, 3.0mm Specifications (compliant with Telcordia and IEC standard): Types: single mode, multi mode Insertion Loss (dB): 0.2 (UPC) , 0.3 (APC) Return Loss (dB): 50 (SM/UPC) , 60 (SM/APC), 35(MM/UPC)
