fiber optics cable connectors
"
Yellow LSZH cable DIN Fiber Optic Connector for Local Area Networks
DIN Fiber Optic Connector for Local Area Networks Feature: Low insertion loss and return loss Free-floating ceramic ferrule UL-rated plastic housing and boot Boots in a variety of colors High precision alignment Availability: The DIN 41612/IEC 60603-2 connector line from ERNI includes standard connectors and customer-specific connector technology solutions. The standard and inverted connectors for printed circuits correspond to national and international standards. All
(LC PC Sm Simplex Fiber Optic Patch Cord
LC PC Simplex Fiber Optic Patch Cord Key Features Superior qualified standard PC, APC, UPC, SPC polishing 100% optic test: Insertion Loss: 0.3 (PC); 0.2 (APC); 0.2 (UPC); 0.3 (SPC) 100% optic test: Return Loss: 45 (PC); 60 (APC); 55 (UPC); 50 (SPC) 0.9mm, 2.0mm, 3.0mm fiber optic cable optional Single mode (9125) or multi mode (50125 or 62.5125) fiber available FC, SC, LC, MU, ST, MT-RJ, etc connector Good exchange ability and good durability Available
FC/UPC OM3 0.9mm Fiber Optic Pigtail LSZH aqua cable IL<=0.2dB
FC/UPC OM3 0.9mm Fiber Optic Pigtail LSZH aqua cable IL 50 (SM/UPC) , > 60 (SM/APC), 35(MM/UPC) Exchangeability: < 0.2 dB Tensile Strength: < 0.2 dB ( 0 to15 Kgf ) Temp. Range: (- 40 to +80 degree centigrade) Geometric Specification of Fiber Optic Patch Cords Finished End-face (fiber optic patch cord that passed Geometric test is of super performance) : Types: PC Connector, APC Connector Radius of Curvature: 10 to 25 mm, 5 to 15 mm Apex Offset:
Optical pigtail SC/APC singlemode G657A1 simplex 2.0mm yellow cable
Optical fiber optic pigtail, LC/APC single mode 2.0mm 3Mtrs yellow LSZH cable Introduction: The pigtail is divided into tail multimode fiber and single-mode fiber. Multimode fiber tail is orange, the wavelength of 850Nm, the transmission distance is 500m, used for short distance interconnection. Single-mode pigtail is yellow, there are two kinds of wavelength, 1310Nm and 1550Nm, transmission distance 10km and 40km respectively. Characteristics: Low insertion loss,high
PVC, OM1, OM2 or OM3 Bundle Multi - Fiber Optic Pigtail for Video Transmission
PVC, OM1, OM2 or OM3 Bundle Multi - Fiber Optic Pigtail for Video Transmission Fiber pigtail is a short optical fiber permanently attached to a source, detector, or other fiber optic device at one end and an optical connector at the other. Features: 4, 6, 8, 12, 24, 48 fibers optional With heat shrinkable tube Applicable connector: FC, SC, ST, LC Cable material: PVC, OM1, OM2 or OM3 optional Single mode or multi mode Cable size: 0.9mm, 2.0mm, 3.0mm Application: 1,FTTH ,
Low insertion loss UPC FC Fiber Optic Pigtails support 10 Gigabit data transmitting rates
Low insertion loss UPC FC Fiber Optic Pigtails support 10 Gigabit data transmitting rates FC Fiber Optic Pigtails Features: Low insertion loss and high return loss Good exchangeability Support 10 Gigabit data transmitting rates MM cables type FC, LC, SC, MU, ST, MTRJ, E2000, MPO optional Polishing: PC, UPC and APC Meets IEC standard Application: 1,FTTH , CATV, LAN, MAN, WAN, Test &Measuremen 2,Video transmission , Data transmission 3,Active Device Termination 4,Premise
3.0mm diameter SC Fiber Optic Pigtails support 10 Gigabit data transmitting rates
3.0mm diameter SC Fiber Optic Pigtails support 10 Gigabit data transmitting rates SC Fiber Optic Pigtails Features: Low insertion loss and high return loss Good exchangeability Support 10 Gigabit data transmitting rates MM cables type FC, LC, SC, MU, ST, MTRJ, E2000, MPO optional Polishing: PC, UPC and APC Meets IEC standard Application: 1,FTTH , CATV, LAN, MAN, WAN, Test &Measuremen 2,Video transmission , Data transmission 3,Active Device Termination 4,Premise Installations
FC, LC, SC, MU, ST, MTRJ Optional Fiber Optic Pigtail IL<=0.2dB China manufacture
FC, LC, SC, MU, ST, MTRJ Optional Fiber Optic Pigtail IL 50 (SM/UPC) , > 60 (SM/APC), 35(MM/UPC) Exchangeability: < 0.2 dB Tensile Strength: < 0.2 dB ( 0 to15 Kgf ) Temp. Range: (- 40 to +80 degree centigrade) Geometric Specification of Fiber Optic Patch Cords Finished End-face (fiber optic patch cord that passed Geometric test is of super performance) : Types: PC Connector, APC Connector Radius of Curvature: 10 to 25 mm, 5 to 15 mm Apex Offset:
ST/UPC Multimode Fiber Optic Pigtail 62.5/125 Colourful 12 Cores Bundle
ST/UPC multimode 62.5/125 colourful 12 cores bundle fiber optic pigtail Introduction:The pigtail is divided into tail multimode fiber and single-mode fiber.Multimode fiber tail is orange, the wavelength of 850Nm, the transmission distance is 500m, used for short distance interconnection.Single-mode pigtail is yellow, there are two kinds of wavelength, 1310Nm and 1550Nm, transmission distance 10km and 40km respectively. Features: Low insertion loss,high return loss;High
