Plastic ST Female to SC Female Hybrid Duplex Fiber Optic Coupler
| Item: | ST-SC Hybrid Adapter | FC Side: | Female |
| SC Side: | Female | Shape: | Rectangle |
| FC Material: | Flameresistant Plastic | SC Material: | Flameresistant Plastic |
| Fiber type: | Singlemode / Mutilmode | Type: | Duplex |
| High Light: | Duplex Fiber Optic Coupler,Female Duplex Optical Coupler,Hybrid Duplex Optical Coupler |
||
Plastic ST Female to SC Female Hybrid Duplex Fiber Optic Coupler
Plastic Duplex ST Female to SC Female Hybrid SC-ST Fiber optic Adapter ,Flameresistant material Coupler
Description:
Used for active connection between two optical fiber connectors, including ST, SC, FC, LC, SMA, ST-SC, ST-FC, ST-LC, etc.Among them, ST, SC, FC, LC, SMA and so on are the same kind of type connection (Mating sleeves) , ST-SC, ST-FC, ST-LC and so on are the different kinds of type connection(Hybrid adapter).ST, FC have D shape, rectangle, square, SC, LC have a single, double, four, can meet the needs of different applications.
Features:
Low insertion loss
High return loss
Easy installation
Various specifications
Good environmental stability
Application:
Fiber optic transmission system
CATV networks
LAN
Testing/Measurement Instruments
Fiber distribution frame, Mounts in fiber optic wall mount and rack mount cabinets.
Specification:
| TYPE | ROHS ST - SC Fiber Adapter Hybrid Optical Fiber Adapter Fiber Optic Adaptor, Low Insert Loss | |||||||||
| Product Type | FC or FC/D | ST | SC | LC | SMA | ST/SC | FC/SC | FC/ST | Utralow insertion loss (FC SC ST) |
|
| Insertion loss | ≤0.2 | ≤0.2 | ≤0.2 | ≤0.1 | ≤0.5 | ≤0.4 | ≤0.5 | ≤0.1 | MM≤0.05 | SM≤0.1 |
| Repeated mating | ≤0.1 | ≤0.1 | ≤0.1 | ≤0.1 | ≤0.3 | ≤0.2 | ≤0.3 | ≤0.2 | ≤0.05 | |
| Sleeve material | Mainly zirconia ceramic, phosphor bronze can be optional | |||||||||
| Plug and unplug (times) | ≥500 | |||||||||
| Insertion force (g) | 300-600 | |||||||||
| Operating Temperature (°C) | -40~+70 | |||||||||
| Storage Temperature (°C) | -55~+85 | |||||||||
| According Standrand | BelicoreTA-NWT-001209 | |||||||||
| Note | 1. Optical jumper connectors are similar to wire plugs,adptors are similar to outlets. 2. The key indicators of adaptor are insert loss and tensile strength,the smaller interpolation loss & the range of interpolation force, the better. 3. The performance of ceramic sleeve is better than phosphorus bronze sleeve. |
|||||||||
Drawing and Pictures:
-
MThe product is highly cost effective,the company salesman have good service,professional!
-
8Reliable manufacturer,reassuring,experienced!
-
HNice packing,delivery fast,satisfied.
DWDM-Dense Wavelength Division Multiplexing
DWDM - Dense Wavelength Division Multiplexing Features 100GHz, 200GHz channel spacing available Low insertion loss High channel isolation High stability and reliability Epoxy free on optical path Applications Channel add/drop DWDM network Wavelength routing Fiber optical amplifier CATV fiber optic ...
16 Port Fiber Optic Floor Splitter Distribution Box
16 Port Fiber Optic Floor Splitter Distribution Box Product Description It is mainly applied to the splitter points of corridor where the FTTH available are set up. It is suitable for the first-level or second-level splitter, especially with distinct advantage for the second-level splitter. The ...
transceiver module QSFP-DD 400GE FR4 2 km of 4 CWDM lanes MUX/DEMUX design
QSFP-DD 400GE FR4 Transceiver Module - 2 km, 4 CWDM Lanes MUX/DEMUX Design The OM3660FX102 is a transceiver module designed for 2 km optical communication applications, compliant with the 100G Lambda MSA standard. This module converts 8-channel 53.125 Gbps electrical data to 4-channel 106.25 Gbps ...
OM3 MPO Harness Cable For 40G 100G Network Applications
OM3 MPO Harness Cable Low Insertion loss Supports 40G and 100G network applications Fiber Optic Cable Description 12 fiber om4 mpo mtp connector ribbon cable fiber optic pigtail MPO/MTP multicore cable assemblies facilitate rapid deployment of high density backbone cabling in data centers and other ...
