sc optical attenuator
"
10dB ST Female to Male fiber optic Attenuator for network system
1.Specification: Item/Model Female&Male Fixed In-line Variable Attenuation Value 1dB,3dB,5dB,10dB,15dB,20dB,25dB,30dB Attenuation accuracy 1dB Wavelength 1310/1550 Work Temperature -40+85 Storage Temperature -40+85 2. Applications: Optical Fiber Communication Network Passive optical networks high-speed optical fiber transmission system CATV long distance DWDM system OADM 3. Ordering information: Attenuation type: female & male, fixed, in-line, variable Connector type:
SC/APC Female to Male Attenuator , Singlemode, attenuation value:1-30 dB
SC/APC Female to Male Attenuator , Singlemode, attenuation value:1-30 dB 1.Characteriatic: Metal housing material Low back reflection and Low PDL High precision attenuation value Precision control of attenuation range Wide attenuation range Precision ceramic ferrule 2.Application: Optical Fiber Communication Network Passive optical networks Data Transmission Network CATV Fiber Optic Sensor Local Area Networks(LANs) Optic Instrumentation Testing instrumentation 3.Specification
SC Adapter Type 3db Fiber Optic Attenuator Single Mode
SC Adapter Type 3db Fiber Optic Attenuator Single Mode SC Singlemode adapter type 3db 5db10db 15db Fiber Optic Attenuator Product Description Attenuator optic attenuator is a precise device that can provide different attenuation for needing.They are used in the transmit line of fiber.There are two kinds of attenuator,alterable and fixable .The attenuation form 1dB to 65dB. Optic attenuator is a precise device that provide the attenuation form 1dB to 65dB.It is design under
FC UPC Fiber Optic Attenuator
SC UPC Fiber Optic Attenuator FC/UPC Singlemode plug type 3db 5db 10db 15db Male To Female optical fiber Attenuator Product Description Optical attenuator is a passive device used to reduce the power level of an optical signal. It could be applied to debug optical power performance & optical instrument calibration correction & fiber signal attenuation to ensure the optical power in a stable and desired level in the link without any changes on its original transmission wave.
1dB 2dB 3dB 4dB 5dB Fixed SC Fiber Optic Attenuator
1dB 2dB 3dB 4dB 5dB Fixed SC Fiber Optic Attenuator 1dB 2dB 3dB 4dB 5dB SC Attenuator Male to Female Fixed Fiber Optic Attenuator Product Descriptio 1. Introduction: * High power 1W continuous operation tested over 1000 hours * Precise attenuation * Return loss UPC >50 dB APC >60 dB * Low ripple broadband design for operation at both 1310 and 1550 nm * Attenuation range for SC, FC, and LC types 1 to 13 dB in 1 dB increments, 15 dB, and 20 dB 2. Fiber Optical Attenuator
Male To Female Single Mode SC APC 30dB Fiber Optic Attenuator
Male To Female Single Mode SC APC 30dB Fiber Optic Attenuator 0-30db male to female single mode SC/APC High return loss metal fiber optic attenuator Product Description 1. Introduction: The fiber attenuator is an optical device that reduces the energy of an optical signal. It is used to attenuate the input optical power and avoid the distortion caused by the optical receiver due to the strong input optical power. As an optical passive device, the optical fiber attenuator is
High Return Male to Female Fiber Optic 5dB SC APC Attenuator
High Return Male to Female Fiber Optic 5dB SC APC Attenuator 1dB 2dB 3dB 4dB 5dB SC Male to Female Fiber Optic 5dB SC APC Attenuator Product Description 1. Introduction: Fiber optic attenuator is a passive device used to reduce the amplitude of a light signal without significantly changing the wave form itself. This is often a requirement in Dense Wave Division Multiplexing (DWDM) and Erbium Doped Fiber where the receiver cannot accept the signal generated from a high-power
20db SC APC Green Single Mode Fixed Optical Attenuator
20db SC APC Green Single Mode Fixed Optical Attenuator 1-30db SC APC green color single mode Fixed Type Fiber Optic Attenuator Product Description* High power 1W continuous operation tested over 1000 hours* Precise attenuation* Return loss UPC >50 dB APC >60 dB* Low ripple broadband design for operation at both 1310 and 1550 nm* Attenuation range for SC, FC, and LC types 1 to 13 dB in 1 dB increments, 15 dB, and 20 dB Features :Fixed Attenuator(Fixed Type FC, SC, ST, LC
Red Hat 10db 15db Female To Female Optical Attenuator
Red Hat 10db 15db Female To Female Optical Attenuator Red hat 3db 5db 10db 15db Female to Female optical fiber attenuator Product Description Optical attenuator is a passive device used to reduce the power level of an optical signal. It could be applied to debug optical power performance & optical instrument calibration correction & fiber signal attenuation to ensure the optical power in a stable and desired level in the link without any changes on its original transmission
