Horizontal PC material Fiber Optic Splice Closure , optical splice closure
| IP: | 68 | Max capacity: | 96 Single Fibers |
| Dimension: | 400*250*150 Mm | Material: | PC |
| High Light: | fiber optic equipments,fiber optic splice closure |
||
Horizontal PC material Fiber Optic Splice Closure , optical splice closure
►Features
- Reliable gasket sealing
- Easy installation with no special tool required
- Re-enterable with no re-entry kit needed
- High compressive strength
►Applications
- Suitable for ribbon and bunchy fibers
- Aerial
- Cable duct
- Direct burial
►Specification
| Characteristics | Value/Performance | Methods and Conditions |
| Mechanical | ||
| Air Tightness | No air bubble seen | Put closure under water for 15min with closure's internal air pressure set at 100kPa±5kPa. |
| Remains100kPa±5kPa | Measure the internal pressure 24 hours later | |
| Air Tightness after re-installation |
No air bubble seen and pressure remains unchanged |
Do re-entry and re-installation 3 times and repeat above Air Tightness Tests. |
| Axial Pulling |
Pressure remains unchanged |
Pulling force: 1000N Time: 1min Internal air pressure: 60kPa±5kPa |
| Compression |
Pressure remains unchanged |
Applied pressure: 2000N/100mm Time: 1min Internal air pressure: 60kPa±5kPa |
| Impact |
Pressure remains unchanged |
Impact energy: 16N.m No. of impacts: 3 Internal air pressure: 60±5kPa |
| Bending |
Pressure remains unchanged |
Bending angle±45°(in two opposite directions) Tension: 150N No. of bending: 10 Internal air pressure: 60kPa±5kPa |
| Twisting |
Pressure remains unchanged |
Twisting angle: ±90° Torque: 50N No. of twisting: 10 Internal air pressure: 60kPa±5kPa |
| Thermal | ||
| Temperature Cycling | Pressure drop ≤5kPa |
Cycling range: -40 ~ +60°C Cycling time: 2hrs at -40°C, then 2hrs at +60°C No. of cycling: 3 Internal air pressure: 60kPa±5kPa |
| Electrical | ||
| Insulation |
Resistance between metal parts:2.0x105MΩ |
Soak closure into water in 1.5m-depth for 24hrs,and measure the insulation resistance after taking it out of water. |
|
Resistance between each metal part and ground:2.0x105MΩ |
||
| High Voltage |
No voltage break-downs and sparks |
Soak closure into water in 1.5m-depth for 24hrs, then apply 15kV DC to the metal parts inside |
-
GThe product is highly cost effective,the company salesman have good service,professional!
-
MMeet the standard of Telcordia GR-1435-CORE compliant.
-
LShip fast,good cost-effective.great sale-after service.
10 / 100m Dual Fiber Sm 25km St Fiber Optic Media Converter
10 / 100m Dual Fiber Sm 25km St Fiber Optic Media Converter CY01/02 Series 10/100M Singlemode Single Fiber Media Converter. 10/100M Singlemode Single Fiber Media Converter can convert Optical-Electric Ethernet signals between 10/100M UTP interface (TX) and 100M optical fiber interface (FX). It could ...
Fiber Optic Plastic Splitter Distribution Box (32 port)
Fiber Optic Plastic Splitter Distribution Box (32 port) This Series plastic distribution box, with insert-style splitters, is suitable for outdoor, corridor or weak current silo applications. It can be used for local cable or drop cable end and sub-distribution, as well as protective connection of ...
transceiver module OSFP 800GE SR8 100 m OM4 & 60 m OM3
Transceiver Module OSFP 800GE SR8 100 m OM4 & 60 m OM3 The OM3887SX100 is a parallel 800G Octal Small Form-Factor Pluggable (OSFP) SR8 optical module designed for optical communication applications. The optical module uses a 4-level pulse amplitude modulation (PAM4) format. The optical module ...
2.0mm 1m 2m 3m 5m 10m SC/UPC SC Single Multi Mode Fiber Optic Patch Cord
2.0mm 1m 2m 3m 5m 10m SC/UPC SC Single Multi Mode Fiber Optic Patch Cord Description MPO/MTP trunk cables are used to interconnect cassettes, panels or ruggedized MPO fan-outs, and easy to rapid deployment of high density backbone cabling in data centers and other high fiber environments reducing ...
